AI-powered ERP
AI-assisted ERP for adhesive bonding
NTB SpecPro ERP is an AI-powered ERP that tracks adhesive life, cure cycles and quality records for companies doing adhesive bonding.
Other languages: Türkçe · العربية · Azərbaycanca
What is inside?
If measurements on the same part are drifting towards the tolerance limit, if the soak margin in a furnace cycle is shrinking, or if scrap at one station is higher than at the others, it is brought to you as an early warning of a likely defect. An instrument approaching its calibration date, a late job and a missing document are on the same list. The AI suggests the possible cause; the assessment is yours.
Shelf life and pot life are tracked; an expired adhesive is closed to use in the ERP.
The cure cycle is compared with the target band.
Bond test results are compared with the limits you enter.
Which adhesive lot was used on which part is seen with one click.
Defects such as low adhesion are tied to the record; the root cause is tracked.
Also with you on the phone
From the ERP tab in the NTB SpecPro phone app you enter a defect record, start and finish a work order, photograph a document; the authorised person sees early warnings and live charts on the phone.
Built on field experience
NTB SpecPro ERP and its modules were designed from long hands-on experience in special processes; its AI is being trained with that experience too. We provide not only software but engineering support as well.
A process expert stands behind it
From the Expert support tab in the ERP you put your question to the expert of your process. Questions about using the ERP are free; engineering questions (Technical question) are paid.
Get to know NTB SpecPro ERP →
NTB SpecPro process quality engineering · info@ntbspecpro.com