AI-powered ERP
AI-assisted ERP for welding shops
NTB SpecPro ERP is an easy-to-use, AI-powered ERP for shops doing welded fabrication.
From the work order to the material certificate, from the quality record to shipment, everything is in one place and linked together.
Other languages: Türkçe · العربية · Azərbaycanca
What is inside?
If measurements on the same part are drifting towards the tolerance limit, if the soak margin in a furnace cycle is shrinking, or if scrap at one station is higher than at the others, it is brought to you as an early warning of a likely defect. An instrument approaching its calibration date, a late job and a missing document are on the same list. The AI suggests the possible cause; the assessment is yours.
The certificate is tied to the lot; which work order a heat went to is seen with one click.
The operator scans their card and the operation barcode; the job starts, finishes, and the record is written.
A weld photo taken on the phone is attached to the record together with the marked possible defects; the engineer confirms or corrects the marks, the AI gives a second opinion. The final assessment rests with the welding engineer.
A defect record is opened; root cause and corrective action are tracked in the same place.
Also with you on the phone
From the ERP tab in the NTB SpecPro phone app you enter a defect record, start and finish a work order, photograph a document; the authorised person sees early warnings and live charts on the phone.
Built on field experience
NTB SpecPro ERP and its modules were designed from long hands-on experience in special processes; its AI is being trained with that experience too. We provide not only software but engineering support as well.
A process expert stands behind it
From the Expert support tab in the ERP you put your question to the expert of your process. Questions about using the ERP are free; engineering questions (Technical question) are paid.
Get to know NTB SpecPro ERP →
NTB SpecPro process quality engineering · info@ntbspecpro.com