AI-powered ERP
AI-assisted ERP for composite production
NTB SpecPro ERP is an AI-powered ERP that tracks prepreg life, autoclave cycles and quality records for companies producing composites.
Other languages: Türkçe · العربية · Azərbaycanca
What is inside?
If measurements on the same part are drifting towards the tolerance limit, if the soak margin in a furnace cycle is shrinking, or if scrap at one station is higher than at the others, it is brought to you as an early warning of a likely defect. An instrument approaching its calibration date, a late job and a missing document are on the same list. The AI suggests the possible cause; the assessment is yours.
Every removal from the freezer is recorded and the remaining out-life is calculated; a roll about to expire is warned about in advance.
The lot that will expire first is suggested; an expired lot is closed to use in the ERP.
In the cure cycle, the time spent in the target band is compared with the required time and flagged if it falls short.
Which roll and which autoclave cycle were used on which part is seen with one click.
Defects such as delamination are tied to the record; the root cause is tracked in the same place.
Also with you on the phone
From the ERP tab in the NTB SpecPro phone app you enter a defect record, start and finish a work order, photograph a document; the authorised person sees early warnings and live charts on the phone.
Built on field experience
NTB SpecPro ERP and its modules were designed from long hands-on experience in special processes; its AI is being trained with that experience too. We provide not only software but engineering support as well.
A process expert stands behind it
From the Expert support tab in the ERP you put your question to the expert of your process. Questions about using the ERP are free; engineering questions (Technical question) are paid.
Get to know NTB SpecPro ERP →
NTB SpecPro process quality engineering · info@ntbspecpro.com