AI-powered ERP
AI-assisted ERP for Nadcap
NTB SpecPro ERP is an AI-powered ERP that collects process records while the work is done, for companies doing special processes such as heat treatment, welding, coating and composites.
Other languages: Türkçe · العربية · Azərbaycanca
What is inside?
If measurements on the same part are drifting towards the tolerance limit, if the soak margin in a furnace cycle is shrinking, or if scrap at one station is higher than at the others, it is brought to you as an early warning of a likely defect. An instrument approaching its calibration date, a late job and a missing document are on the same list. The AI suggests the possible cause; the assessment is yours.
The recorder readings are compared with the target band; the time spent in the band is compared with the required time and flagged if it falls short.
An instrument past its calibration is flagged; an out-of-service instrument cannot be selected.
Who did which job, and whether their qualification was valid that day, is visible in the record.
Test results are compared with the limits you enter; an out-of-limit result is flagged.
Part, heat, material lot and defect record are linked together; the root cause is tracked in the same place.
Also with you on the phone
From the ERP tab in the NTB SpecPro phone app you enter a defect record, start and finish a work order, photograph a document; the authorised person sees early warnings and live charts on the phone.
Built on field experience
NTB SpecPro ERP and its modules were designed from long hands-on experience in special processes; its AI is being trained with that experience too. We provide not only software but engineering support as well.
A process expert stands behind it
From the Expert support tab in the ERP you put your question to the expert of your process. Questions about using the ERP are free; engineering questions (Technical question) are paid.
Get to know NTB SpecPro ERP →
For the Nadcap self-assessment you can also look at the NTB SpecPro Quality management module: Nadcap self-assessment →
NTB SpecPro process quality engineering · info@ntbspecpro.com